News Center
Your present position:Home >> News Center

In stainless steel and other difficult to cut materials turning extend tool life in roughing methods

Time:2013.05.22 News source :Danyang Shiji Meijing making Co.Ltd. Browsing number:
You can try using a conical cutting depth to be processed. For example, if you carry out cutting depth of 2mm 2 roughing passes,
1 pass: initially 3mm, conical final cutting depth of 1mm.
2 passes: initially 1mm, finally 3mm. (In this case, 2 passes only the tip of lateral movement, natural depth of cut for tapered)
Thus, by changing the depth of cut to cut, can position the tip of the load force changes in order, can control the state of wear and longer tool life.
This paper is divided into 1 pages




Related products:
Laser Welded Diamond Saw Blade
Laser Welded Diamond Saw Blade
Alloy saw blade
Alloy saw blade
Danyang Shiji Meijing making Co.Ltd.©All rights reserved  
Address:Xing Village,Situ Town,Danyang City  Tel:86-511-86808012  
Domestic Business: Contact:Mr.Miao Mr.Miao 13327755588
Email:sjmjmzg@163.com  International Business: E-mail: bladesales@outlook.com